KALLISTA P72000 Guia De Instalacion página 5

1"
(2.5 cm)
Nut
2. Install the Lavatory
For wood frame installations, drill 1/4" mounting holes at the
marked locations on the finished wall for the lavatory.
For tile or mansonry wall installations, anchors (provided) are
required. Drill 1/2" mounting holes at the marked locations on
the finished wall for the lavatory
Install hanger bolts (provided) in the wall so they extend 1" (2.5
cm) beyond the finished wall.
Install the faucet and drain to the lavatory according to the
manufacturer's instructions.
Position the pedestal on the floor.
Carefully set the lavatory on the pedestal so the hanger bolts
extend through the lavatory anchoring holes.
Position the lavatory as desired.
Install the nuts (provided) to the hanger bolts. Level the lavatory,
and carefully tighten the nuts until secure. Do not overtighten.
Kallista
Hanger Bolt
5 1008428-2-A