Product Overview; Battery Power - Chauvet DJ EZbar Guía De Referencia Rápida

Product Overview

Battery Life
Indicator
IR
Sensor
Mic Stand
Dimmer
Thread
Button
AC Power
This product has an external auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60
Hz. The output voltage is 15 VDC, 1.6 A.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.

Battery Power

Each EZbar comes with a rechargeable lithium-ion battery for cable-free operation.
The charging indicators on the EZbar show red when the battery is charging, and green when it is fully
charged.
Do not charge the battery in a closed container.
Battery Life Indicator
The battery life indicator shows the remaining amount of internal battery life.
Battery Charge Notes
• Avoid depleting the battery below 10%.
• For best results, charge the battery in a temperature between 32 °F (0 °C), and 95 °F (35 °C).
• When charging the battery, keep the product at least 1 m from any open flame or hot plate.
• If the battery is completely discharged, the device cannot be turned on immediately when the charger is connected. Allow
a depleted battery to charge for a few minutes before turning on the device.
• While charging, the device may heat up. This is normal and should not affect the device's lifespan or performance. If the
battery gets hotter than usual, the charger may stop charging.
• Do not charge the battery in a closed container.
• Do not charge the battery for more than 24 hours.
Battery Run Time
EZbar QRG Rev. 4
QUICK REFERENCE GUIDE
Power
Switch
Charging
Indicators
DC Power
Input
100% 75%
Maximum Run Time
Up to 8 hours
Safety Loop
Velcro strap
pass-through
50% 25%
Recharge Time
7.5 hours
EN
Magnetic Base
2