Tabla de contenido
Idiomas disponibles
Idiomas disponibles
NOTE:
The
lower
blade
•
factory-assembled. Do not tamper with it.
OPERATION
Holding material and shearing method
WARNING:
Before operating the tool, be sure to firmly tighten
•
the upper blade securing bolt and the lower blade
securing bolt. Loosen bolts may cause blades
coming off, resulting in a serious injury.
When cutting, always place the
•
workpiece so that the material cut away is
positioned on the right side to the operator.
The materials for cutting should be fastened to the
workbench by means of workholders.
013084
Always hold the tool firmly with one hand on housing. Do
not touch the metal part.
Keep the shear moving parallel with the material.
Maximum cutting width
A
1800 mm
(70-7/8")
1
004703
Stay within the specified maximum cutting width (A):
Case of length 1,800 mm (70-7/8").
Mild steel (thickness)
1.6 mm (16 ga)
Max. cutting width (A)
100 mm (4")
Stainless (thickness)
1.2 mm (18 ga)
Max. cutting width (A)
80 mm (3-1/8")
006429
Minimum cutting radius
Minimum cutting radius is 30 mm (1-3/16") when cutting
1.0 mm (20 ga.) mild steel.
All manuals and user guides at all-guides.com
positioning
screw
is
shear
on the
1. Cutting line
Under 1.2 mm (18 ga)
No limit
Under 1.0 mm (20 ga)
No limit
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before attempting to perform inspection
or maintenance.
Never use gasoline, benzine, thinner, alcohol or the
•
like. Discoloration, deformation or cracks may
result.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized or Factory Service Centers, always
using Makita replacement parts.
OPTIONAL ACCESSORIES
CAUTION:
These
accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Shear blades
•
Hex wrench
•
Wrench holder
•
NOTE:
Some items in the list may be included in the tool
•
package as standard accessories. They may differ
from country to country.
6
or
attachments
are
Only use
accessory or
Tabla de contenido
