Assembly Gargantua; What You Need - Extremis GARGANTUA Instrucciones De Montaje

Ocultar thumbs Ver también para GARGANTUA:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43

ASSEMBLY GARGANTUA

WHAT YOU NEED

2 people
no. 13 - 17 spanner
no. 17 double ring spanner
+/- 45 min.
2. Put the four legs in place, with the welded plate facing the
centre. Fasten the legs by means of the 8 long bolts and the
flat washers. Do not tighten the bolts completely at this stage!
3. Place the central cube in the middle of the table between the
four legs. The cube must be positioned with the completely
open side facing the tabletop. Fasten the cube to the legs using
the 8 short bolts and nuts. The nuts must be put on the inside
of the cube. Do not tighten the bolts completely at this stage!
4

assembly gargantua

1. Put the tabletop on the ground upside down. Use the packing
material to protect the tabletop's surface.
ATTENTION! If you wish to install the Inumbr(in)a parasol
onto the Gargantua table, use the therefore dedicated installation
part for Gargantua that is included in the Inumbr(in)a. (see page
9 for the assembly).
4. Firmly tighten all long bolts M10 with the nuts M10.

Capítulos

loading