Before First Use; Operating Instructions - Cuisinart WAF-F20 Serie Instrucciones Y Libro De Recetas

BEFORE FIRST USE

Remove all packaging and any promotional labels
or stickers from your waffle maker. Be sure that
all parts (listed in Part and Features) of your
new waffle maker have been included before
discarding any packaging materials. You may
want to keep the box and packing materials for
use at a later date.
Before using your Cuisinart
Waffle Maker for the first time, remove any
dust from shipping by wiping the plates with
a damp cloth.
NOTE: The first time you use your Cuisinart
Double Belgian Waffle Maker it may have a slight
odor and may smoke a bit. This is normal and
common to heating appliances.
NOTE: This Cuisinart
Maker has been treated with a special nonstick
coating. Before each use, we suggest you
season the waffle grids by spraying or brushing
with cooking spray or flavorless vegetable oil
to thoroughly coat the grids. Wipe with a paper
towel or pastry brush.
OPERATING
INSTRUCTIONS
MAKING ONE WAFFLE
1. Place the Double Belgian Waffle Maker on
a clean flat surface.
2. Plug cord into 120V AC wall or outlet.
3. Turn the rocker switch to the ON position.
Adjust control knob to a desired setting.
Your Cuisinart
Maker will now begin preheating.
4. Once preheated, the indicator lights will
be illuminated and the waffle maker will
beep 6 times.
5. After waffle maker is preheated, season
waffle plates with cooking spray or brush
with a flavorless oil to thoroughly coat all
surfaces. It's important that you preheat
the waffle maker before seasoning with
cooking spray or oil. Your waffle maker is
now ready to bake.
IMPORTANT NOTICE!
TO FACILITATE OPENING AND CLOSING
THE DOUBLE WAFFLE MAKER, PLEASE
NOTE THE FOLLOWING INSTRUCTIONS.
Double Belgian
®
Double Belgian Waffle
®
Double Belgian Waffle
®
TO OPEN:
Place thumb on top of lip of lower handle
and index finger under lip of upper handle.
Push open.
TO CLOSE:
Place thumb on top handle and fingers under
bottom handle and pull together until shut.
NOTE: Please note that top and bottom grid
covers may separate slightly during use. This
is normal. Should this occur, do not close
handles to rotate until unit beeps, indicating that
the baking cycle is completed. To reduce grid
separation and overflow during cooking, you may
®
want to reduce the quantity of batter.
6. After the waffle maker is preheated and
ready for baking, open the waffle maker
lid. Pour waffle batter evenly on the waffle
grid. Use a heatproof spatula to spread
the batter evenly over the plate.
7. Close top cover and rotate the waffle
maker plates 180º.
8. When the waffle is baked to the desired
doneness, the unit will beep three times
and the indicator light will illuminate.
9. Rotate waffle grid with the lit indicator
light to the top position. Raise top cover
and remove the baked waffle with a
heatproof spatula.
10. Repeat for additional waffles.
MAKING TWO WAFFLES
AT ONE TIME
1. Raise top cover and pour waffle batter
evenly on the waffle grid. Use a heatproof
spatula to spread the batter evenly over
the plate.
2. Close top cover and rotate the waffle
grid 180°. The Ready indicator light will
turn off.
3. Raise the cover that is now on top and
pour waffle batter evenly on the waffle
plate. Use a heatproof spatula to spread
the batter evenly over the plate. Close the
cover and rotate the waffle maker plates
180°.
4. When one of the waffles is done, the unit
will beep three times and the indicator
light located on the waffle maker cover
will illuminate.
5. Rotate the waffle plates with the lit
indicator to the top position. Raise the top
cover and remove the baked waffle.
5