Troubleshooting; Product Maintenance - HAMPTON BAY 415-701 Manual De Instrucciones

TROUBLESHOOTING:

The light does not turn on.

PRODUCT MAINTENANCE:

1. Disconnect fixture's plug from wall receptacle.
2. To clean the fixture, use a dry or slightly dampened clean cloth (use clean water, never a
solvent) to wipe the surface of the fixture.
3. Do not use any cleaners with chemicals, solvents or harsh abrasives. If necessary, use a
mild soap to clean off any dirt or stains.
The manufacturer warrants this lighting fixture to be free from defects in materials and
workmanship for a period of one (1) year from date of purchase. This warranty applies only
to the original consumer purchaser and only to products used in normal use and service. If
this product is found to be defective, the manufacturer's only obligation, and your exclusive
remedy, is the repair or replacement of of the product at the manufacturer's discretion,
provided that the product has not been damaged through misuse, abuse, accident,
modifications, alterations, neglect or mishandling. This warranty shall not apply to any
product that is found to have been improperly installed, set-up, or used in any way not in
accordance with the instructions supplied with the product. This warranty shall not apply to
a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, or
faulty installation, or any other failure not relating to faulty material or workmanship. This
warranty shall not apply to the finish on any portion of the product, such as surface and/or
weathering, as this is considered normal wear and tear. The manufacturer does not
warrant and specially disclaims any warranty, whether expressed or implied, of fitness
for a particular purpose, other than the warranty contained herein. The manufacturer
specifically disclaims any liability and shall not be liable for any consequential or
incidental loss or damage, including but not limited to any labor/expense costs involved
in the replacement or repair of said product.
Page 8
Possible Cause
Wall switch or circuit breaker is off.
Light bulb may be dead. Test light bulb
in a known working light fixture.
Light bulb is loose.
LIMITED WARRANTY
Corrective Action
Turn on switch or circuit breaker.
Replace light bulb.
Tighten light bulb in socket.