Installation Instructions - HAMPTON BAY 415-701 Manual De Instrucciones

PARTS INCLUDED FOR INSTALLATION (parts are not to
scale):
1 ea Main Fixture Body (#1)

INSTALLATION INSTRUCTIONS:

1. Place the Mounting Plate (#13) onto the desired location. Mark the location of the
mounting holes of the Mounting Plate (#13). (Fig. 2)
2. Remove the Mounting Plate (#13) from the desired location. Drill appropriately sized
Wall Holes (#14) at the marked mounting hole locations. Insert Ceiling Anchors (#15)
into the Wall Holes (#14). (Fig. 2)
3. Replace the Mounting Plate (#13) onto the desired location. Feed the Mounting Screws
(#16) through the mounting holes of the Mounting Plate (#13) and thread them into the
Ceiling Anchors (#17). Tighten the Mounting Screws (#16) until the Mounting Plate
(#13) is securely flush against the wall. (Fig. 2)
4. Place the Canopy (#11) of the Main Fixture Body (#1) over the Mounting Plate (#13)
making sure the Fixture Screws (#18) feed through the mounting holes of the Canopy
(#11). Thread the Lock Nuts (#19) onto the Fixture Screws (#18) until the Canopy (#11)
is securely flush against the wall. (Fig. 3)
Page 6
2 ea Mounting
Screws (#16)
2 ea Ceiling
Anchors (#17)
2 ea Lock Nuts
(#19)
1 ea Mounting
Plate (#13)