Troubleshooting Guide - HAMPTON BAY HB-4190 Serie Manual De Instrucciones

SYMPTOM POSSIBLE CAUSE
Light will not
1. Light switch is turned off.
come on.
2. Bulb is loose or burned
3. Fuse is blown or circuit
4. Daylight turn-off is in effect
5. Incorrect circuit wiring, if
Light comes
1. Light control may be in-
on in day-
light.
2. Light control is in Test. (Set
Light comes 1. Light control may be
on for no ap-
parent rea-
son.
2. Sensitivity is set too high.

TROUBLESHOOTING GUIDE

If you experience a problem, follow this guide.
out.
breaker is turned off.
(recheck after dark).
this is a new installation.
stalled in a relatively dark
location.
control switch to an ON-
TIME position).
sensing small animals or
automobile traffic (Reduce
sensitivity).
(Reduce sensitivity.)
SYMPTOM POSSIBLE CAUSE
Light stays
1. The sensor may be picking
on continu-
ously.
2. Light control is in Manual
3. L i g h t c o n t r o l i s i n
Light flashes 1. Sensor is in the Test mode.
on and off.
2. Heat being reflected from
Light does 1. Nearby large, light-colored
not stay on
i n M a n u a l
mode.
6
up a heat source like
an air vent, dryer vent,
or brightly-painted heat-
reflective surface. (Reduce
sensitivity).
Mode. (Switch to Auto.)
D B mode.
®
ual rite
(While in TEST mode,
light only stays on for 5
seconds.)
other objects may be
affecting the sensor. (Re-
aim sensor.)
objects reflecting light may
trigger the shut-off feature.
Do not point other lights at
the sensor.
595-5770-05