Command With Basic Functions; Operation; Switching On A Hob; Acoustic Signal - Fagor IF-800S-03-07 Manual De Utilización

C60T376A8.qxd 14/3/07 16:21 Página 13

COMMAND WITH BASIC FUNCTIONS

OPERATION

SWITCHING ON A HOB

The operation is the same as described for the commands with special functions.
TIMER OPERATION
The operation is the same as described for the commands with special functions.

ACOUSTIC SIGNAL

The operation is the same as described for the commands with special functions.
P. FUNCTION (P point) (Fast heating function)
This function allows greater power to be obtained during a certain time.
•The "P." function (P point) is obtained by pressing the "+" button as far as the "P."
position, release the command and the "P." will flash, press the command again
and it will be put in the maximum power "P." position (P point) then press the "-"
command and enter in the chosen cooking time. It will then display "P." (P point).
When the relevant time has passed, the power selected by the user will return.
IMPORTANT
After selecting the power "P." (P point), if you do not choose the final working power, the
hob power will be maintained at "P."
Whilst "P." is displayed (P point) any action on the power commands will cancel the "fast
heating function" and it will return to the classic power regulation mode
WARNING
Preferably use cooking zones situated on different sides. If you choose them on the
same side, using the cooking zone at maximum power limits the other cooking zone,
situated on the same side which is visible in the power indicators.
All manuals and user guides at all-guides.com
C
A B
A
On/Off sensor.
B Power sensors and displays
between 0 and P.
C
Timer sensors and
displays.
D Safety sensor and
D
display.
13