Tabla de contenido
Idiomas disponibles
Idiomas disponibles
8. Setting the Clima Control
The Clima Control is easy to operate with the Push-and-
Turn Knob (PTK).
When you start the Clima Control for the first time, you
directly enter the BOX menu (see section 9). You first set
the BOX before you continue.
After that, you can access the various menus from the
main screen, which displays:
TMP = 33.6 °C
RH =
66%
=> BOX =
90%
CO2 = 1112 PPM
By pressing the PTK you can enter the main menu. An
arrow appears on the left side of the display, allowing
you to select the desired submenu.
9. Setting the fan/box
You enter the box menu:
1. after starting the Clima Control;
2. via the main screen, going through the next steps.
Select "BOX" and press the PTK.
TMP = 33.6 °C
RH =
66%
=> BOX =
90%
CO2 = 1112 PPM
Select "Select box" and press the PTK.
BOX A/M
Auto
BOX min
10%
BOX max
90%
=> Select box
You enter the box menu (fan menu):
____________________________________________________________________________________________________________________________
TechGrow
| Innovative Growing Solutions
Select box
=> Custom
Standard
By turning the PTK you choose standard "Standard" or
customisation "Custom".
If you choose "Standard", proceed with section 9.2.
If you choose the "Custom" option, select "Custom" and
press the PTK. The following screen is displayed.
9.1 Custom menu
Set box to desired
minimum speed.
Push to proceed.
■
The fan is not running or very slowly. Slowly turn the PTK
until the fan runs at 10% of its maximum speed. You set
this as the minimum speed.
Confirm by pressing the PTK. You will enter the next
screen:
Set box to desired
maximum speed.
Push to proceed.
■■■■■■■■■
Now, adjust the fan to the desired maximum speed,
which is 90% of the maximum capacity. First, let the fan
run at maximum speed and then slightly turn back the
PTK until the fan runs at 90% of its capacity.
Press the PTK to confirm.
The box is now
adjusted.
Push button to
continue.
Press the PTK again to enter the next screen:
19
Tabla de contenido
