Working In Manual Mode - Milwaukee M12 3PL Manual Original

WORKING IN MANUAL MODE

In manual mode the lasers self-leveling mechanism is disabled and the laser lines can be set
at any slope required.
1
Place the laser on a solid flat
vibration free surface or on a
tripod.
2
Turn the rotation dial to:
Laser mode indicator LED will display
Horizontal laser will be emitted.
3
Same as in the self-leveling
mode, the laser will generate
3 laser planes, but the laser
beams are interrupted every 8
seconds.
8 sec. 8 sec. 8 sec.
ENGLISH
4
Choose the
beams that you
want to work with
by pushing the
buttons.
5
Tilt the laser and adjust to the
desired angle and height.
6
To turn the Manual mode off,
turn the rotation dial to: .
or
turn the rotation dial to: .
9