Kohler Sterling 11406 Guia Del Usuario página 5

Turn the brackets so they
fit over the sink rim.
Sink - Bottom View
4. Attach the Sink
WARNING: Risk of personal injury. Metal surfaces are sharp
and can cause severe cuts. Use gloves and handle the sink
edges carefully.
Clean the top of the sink rim with a non-abrasive, chloride-free
cleaner. Rinse thoroughly and allow the rim to dry.
Apply a bead of silicone sealant to the rim of the sink, near the
inside edge.
Carefully lift the sink squarely under the countertop cutout. Press
firmly on the sink to form a seal.
Apply a bead of silicone sealant around the edge of the sink rim
to create a seal between the sink and the countertop.
Turn the mounting brackets so they fit over the sink rim. Check
the alignment of the sink in the cutout, making any necessary
adjustments.
Tighten the fasteners to secure the sink to the countertop.
Immediately wipe away any excess sealant with a damp cloth,
and fill any gaps as needed.
5. Finish the Installation
Connect the drain and faucet supply fittings.
Turn on the water supply and check for leaks.
Clean up with a non-abrasive cleaner.
Sterling
Insert (Not Furnished)
Edge Countertop
Opening
Mounting
Bracket
1-3/8" (3.5 cm)
+/- 1/4" (6 mm)
Fastener
(Not Furnished)
Countertop
Mounting
Sink
Bracket
Fastener
(Not Furnished)
5
Sealant
1041809-2-H