Inserting and removing the
SD/SDHC memory card
Take an SD/SDHC memory card
and insert it as shown into the
SD/SDHC card slot.
To remove the memory card,
press the memory card until you
hear a click in the slot and then let
go. The memory card will be automatically ejected a little
from the slot so that you can remove the card.
Close the battery and card compartment with the cover.
Charging the battery
To charge the battery, connect the camcorder to the
supplied power supply.
Plug the mains adapter into a 230 V ~ 50 Hz socket.
The battery requires approximately six hours to
reach full charge for the first time. The red LED
flashes red during the charging procedure.
7