Hergom ADDA 8 Instrucciones Para La Instalación, Uso Y Mantenimiento página 11

Function SLEEP
money. One hour after its activation, the system starts de
transmit your selection to the stove.
confirm your selection.
Please note: if the stove is working in "Auto", it is
not possible to activate the function sleep.
Function chrono-thermostat (available only through the remote control)
WARNING: the time of the automatic switching on and off must be set when the remote control is Off!
WARNING: in the event of an even very short lack of current, you will miss the set time for the automatic switching on or off.
Once the power supply is back, please program the stove again using the remote control!
WARNING: the stove switching on at the scheduled time will keep the same temperature and power you set before you last
switched it off.
WARNING:
In this way the unit will have time to arrange a complete cooling phase. In the event this minimal interval is not calculated, the
stove will not switch on as scheduled.
Program 1 (ON1 and OFF1)
Automatic switching on ON1
Please join the following procedure to set the time for
and the symbol ON1
of the stove.
ON 1
3
ECONO SEND
TURBO
AUTO
ON 1 OFF 1
AL C AL F
ON 1
3