Rollei Steady Butler Mobile 2 Instrucciones página 9

4. Mount the Smartphone
Please make sure that the gimbal is turned off . Insert the smart-
phone . Therefore, put it with one side into the smartphone holder,
push the upper part from the holder to enlarge the holder and
press the smartphone inside . Make sure that the smartphone is well
inserted and that it cannot fall out .
NOTE: The home button of the smartphone should be at the side
near to the tilt motor . Please ensure that the smartphone is fixed
tightly in order to avoid shaking of the gimbal .
If any part of the gimbal appears in the recording, gently slide the
smartphone away from the tilt motor until the gimbal is no longer
visible in the picture .
Please make sure that the gimbal is turned off before the smart-
phone is mounted . We highly recommend to remove the phone case .
You can manually rotate the phone clamp to take photos & videos
in vertical mode .
5. Balancing the Smartphone
If the gimbal is turned on and the smartphone is balanced / levelled
correctly, it will be held by the gimbal without making any sounds
or any shakes . In that case the smartphone is positioned correctly . If
the gimbal is vibrating in a movement, reposition your smartphone .
To adjust the smartphone gravity center,
slide the arm until it is balanced on the tilt
axis to ensure the best stabilizing status
and enduration time .
You can also move the gimbal from horizontal to vertical mode
while the phone is running . To do this, slowly tilt the handle 90° to
the side . The gimbal then automatically aligns the phone . To return
to horizontal mode, slowly return the handle to the vertical position .
9