Safety Precautions - EAS ELECTRIC ML Serie Manual De Instrucciones

Safety Precautions

Thank you for purchasing this air conditioner. This manual will provide you with information on
how to operate, maintain, and troubleshoot your air conditioner. Following the instructions will
ensure the proper function and extended lifespan of your unit.
Please pay attention to the following signs:
Failure to observe a warning may result in serious injury. The appliance must be
installed in accordance with national regulations.
WARNING
Failure to observe a caution may result in injury or equipment damage.
CAUTION
WARNING
Ask an authorized dealer to install this air
•
conditioner. Inappropriate installation may
cause water leakage, electric shock, or fire.
The warranty will be voided if the unit is not
•
installed by professionals.
If abnormal situation arises (like burning
•
smell), turn off the power supply and call your
dealer for instructions to avoid electric
shock, fire or injury.
DO NOT let the indoor unit or the remote
•
control get wet. It may cause electric shock or
fire.
DO NOT insert fingers, rods or other objects
•
into the air inlet or outlet. This may cause injury,
since the fan may be rotating at high speeds.
DO NOT use a flammable spray such as hair
•
spray, lacquer or paint near the unit. This may
cause fire or combustion.
Do not use means to accelerate the
•
defrosting process or to clean, other than those
recommended by the manufacturer.
The appliance shall be stored in a room
•
without continuously operating ignition sources
(for example: open flames, an operating gas
appliance or an operating electric heater).
The appliance shall be stored so as to
•
prevent mechanical damage from occurring.
Page 4
Be aware that the refrigerants may not
•
contain an odour.
Compliance with national gas regulations
•
shall be observed.
Keep ventilation openings clear of
•
obstruction.
DO NOT pierce or burn.
•
A warning that the appliance shall be stored
•
in a well-ventilated area where the room size
corresponds to the room area as specified for
operation.
Any person who is involved with working on
•
or breaking into a refrigerant circuit should hold
a current valid certificate from an industry-
accredited assessment authority, which
authorises their competence to handle
refrigerants safely in accordance with an
industry recognised assessment specification.
Servicing shall only be performed as
•
recommended by the equipment manufacturer.
Maintenance and repair requiring the
assistance of other skilled personnel shall be
carried out under the supervision of the person
competent in the use of flammable refrigerants.
V.2
1