Andis RCTL Instrucciones De Uso Y Cuidado página 3

10. Always attach plug to appliance first, then to outlet. To
disconnect turn control to OFF then remove plug from outlet.
11. WARNING: During use, do not place or leave appliance where it
may be 1) damaged by an animal or 2) exposed to the weather.
12. The battery in this clipper is designed to provide maximum
trouble-free life. However, like all batteries, it will eventually wear
out. Do not disassemble clipper and attempt to replace battery.
13. Batteries can be harmful to the environment if disposed of
improperly. Many communities offer recycling or battery
collection. Contact your local government about disposal
practices in your area.
14. When discarding old batteries, cover battery terminals with
heavy-duty adhesive tape to prevent short circuits. WARNING:
Do not attempt to destroy or disassemble clipper or remove
any of its components. Also, never touch metal terminals with
metal objects and/or body parts, as short circuit may result.
Keep away from children. Failure to comply with these
warnings could result in fire or serious injury.
SAVE THESE INSTRUCTIONS
UNIVERSAL AC/DC POWER ADAPTER
The unit/charging stand is equipped with a universal AC/DC power adapter. Three interchangeable
input plugs are included for use in most countries around the world (Figures A-C).
REMOVING INPUT PLUG:
1. Unplug AC/DC power adapter from wall outlet.
2. While pressing down on button located on input plug, gently push up on plug until it
releases from power adapter.
REPLACING INPUT PLUG:
1. To replace input plug, align tabs on the AC/DC power adapter with slots on input plug
(Figure D).
2. Gently push input plug into power adapter until it snaps into place.
OPERATING INSTRUCTIONS
• The battery is not intended to be replaced by the user.
• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when removing the battery.
• The battery is to be disposed of safely.
CHARGING TRIMMER
This battery charger is intended for use with Andis model RCTL lithium-ion battery with a rated
capacity of 3.7V
adapter into a 230V AC outlet, or according to your local power standards. Note that the
trimmer ON/OFF switch must be in the OFF position for the battery to charge. Plug the
adapter cord directly into the trimmer (Figure E). The green light on the trimmer will turn on.
The trimmer has not been charged at the factory. Please charge the trimmer for 2 hours before
the first use for maximum performance. You can keep the trimmer plugged into the adapter
when not in use. The adapter will maintain the battery at full charge and the green light will
2.8 Wh. Remove the trimmer and AC adapter from the carton. Plug the
3