Troubleshooting Guide; Technical Service - Heath Zenith 8813 Manual De Instrucciones

Power Requirements ..................................... 120 VAC, 60 Hz
Lumens:
Model 8813 .............................................. 1850 LM
Model 8814 .............................................. 3100 LM
LED color temperature ................................ Adjustable: 2700K to 5000K
Wattage:
Model 8813 .............................................. 24 W
Model 8814 .............................................. 36 W
SYMPTOM
The light will not come on.
The light comes on during
the day.
The lights stay on
continuously.
Please call 1-800-858-8501 (English speaking only) for assistance before returning product to store.
If you experience a problem, follow this guide. You may also want to visit our Web site at: www.hzsupport.com. If the
problem persists, call* for assistance at 1-800-858-8501 (English speaking only), 8:00 AM to 5:00 PM CST (M-F).
You may also write* to:
HeathCo LLC, P.O. Box 90045, Bowling Green, KY 42102-9045
ATTN: Technical Service
* If contacting Technical Service, please have the following information available: Model Number, Date of Purchase,
and Place of Purchase.
Please keep your dated sales receipt, it is required for all warranty requests.
4
SPECIFICATIONS

TROUBLESHOOTING GUIDE

POSSIBLE CAUSE
1. Light switch is turned off.
2. Fuse is blown or circuit breaker is turned off.
3. Daylight turn-off (photocell) is in effect.
4. The circuit wiring is incorrect, if this is a new
installation.
The light may be installed in a relatively dark
location.
The light may be installed in a relatively dark
location.

TECHNICAL SERVICE

No Service Parts Available for this Product
To see operational and troubleshooting information and videos,
go to www.hzsupport.com
SOLUTION
1. Turn light switch on.
2. Replace fuse or turn circuit breaker on.
3. Recheck after dark or cover photocell with
black tape to test (see Final Assembly, step 7).
4. Verify wiring is correct.
The light fixture is operating normally under
these circumstances. To test, shine a flashlight at
the photocell. The light should turn off.
The light fixture is operating normally under
these circumstances. To test, shine a flashlight at
the photocell. The light should turn off.
209841-01