Troubleshooting - FujiFilm SonoSite S Serie Configuración De Una Conexión A La Red

Troubleshooting

If you have trouble connecting the ultrasound system to the wireless network, see
"Troubleshooting" on page 7 for suggestions. If the trouble continues, contact FUJIFILM SonoSite.
Table 1: Troubleshooting
Symptom
The ultrasound system does
not connect.
Troubleshooting
Solution
Check the following for information about the network:
Make sure that the following icons appear in the system status area on
the ultrasound system screen:
Wireless
Ultrasound-connected
On the ultrasound system, display the Network Status setup page. The
page displays three lines of general information about the connection and
five additional lines about the wireless connection (if present).
Check to see if the Wireless USB Dongle shows as WI-FI ready on the
Settings/Setup page under USB devices. (Applicable for SonoSite M-Turbo,
SonoSite Edge, SonoSite S Series, SonoSite Edge II and SonoSite SII
ultrasound systems.)
Table 1,
7