Installation Steps; Care And Cleaning - LUND Ventvisor Deflector Instrucciones De Instalación

Installation Steps

Insert visor into window channel, front flange first.
3
Rear Visors
With the visor in place insert a clip into the
window channel behind the visors front and
rear
visor
5

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Lund
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is
top quality in terms of fit, durability, finish and ease of installation.
™
NOTE: Actual application may vary slightly from illustrations.
rear flanges.
rear visor
clip
branded products offered by Lund International. We take the utmost pride in our
®
800-328-2438 • Visit us at lundinternational.com
© 2019 Lund, Inc. All rights reserved.
Lund and the Lund
®
Remove tape liner by pulling on free ends. Raise window
slowly and leave up for 24 hours to secure visor to window
4
NOTE: It is necessary to both hold the visor up into the window
channel AND pull the bottom of the visor slightly outward while rais-
ing the glass to seat visor properly.
x2
6
Lund International
logo are trademarks of Lund, Inc.
®
Page 2 of 2
channel.
If the visor does not seat
correctly, roll down window
and repeat Step 6.
Repeat Steps 1 thru 6 for passenger side.
The material that your product is made from can
be recycled. Please also consider recycling the
packaging that your product came in.