INSTALLATION
Product Description
Top Board
Control Panel
Door
Cabinet
Note: Please see the products you purchased in kind prevail.
Installation
•
Dryer should be placed in a ventilated area with not
less than 10cm distance from the wall. It is suggested
there are no obstacles within 1.5m in front of dryer and
keep ventilated.
10cm
7
INSTALLATION
Level Adjusting
•
Once in its permanent operating position,
check that the dryer is absolutely level with the aid
of a spirit level. If it is not, adjust the feet with a tool.
Note!
if dryer could not be placed horizontally (the lean angle is no more than 2°,
the dryer will work unbalanced or stop working sometimes.
Notice when installing:
• Do not install the dryer in the open air or place easily damaged by rain;
• Do not place the back of dryer near curtain or something in the wind;
• Do not place the dryer near gas or flammable area.
•
Flex tube fixing:
• Connect one end of flex tube with whorl to the back vent, then fix it deasilly till tight.
• The other end of flex tube will be extended to outdoor, please refer the right
assemble way to the below pictures.
8