Wiring Diagram - Ibx S50L Manual De Usuario

6. Alarms and shutdown
In case of a power failure, the identifier ALM2 will light up, the controller will automatically
-
stop and a buzzer sound will go off. Turn off the power immediately and carefully check the
wiring is correct.
In case of an over-temperature alarm, the identifier ALM1 will light up and the buzzer sound
-
will go off. Stop it by pressing any key.
If the over-temperature alarm is caused by a change in the temperature set value, the
identifier will light up, but there will be no sound.
In case of a fault with the temperature sensor or the controller itself, - will display. Carefully
-
check the temperature sensor and its wiring.
When turning off the equipment, always press
-
turning off the device.
If the door is open during functioning, the identifier OPEN will show and the rotation will stop.
-
Close the door to continue with the regular functioning of the device.

7. Wiring diagram

to stop any ongoing functions before
14