Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5. Time internal settings
5.1. How to use
When Fr = 0 or Fr = 1, the motor only runs in one direction, forward or reverse, respectively. In that
case, follow these instructions to set the rotation time:
1. Press
2. Use
3. Press
Once the timer goes off, it will make a buzzer sound and display End. Stop it by pressing
any key. To restart the operation, press
Note: when the timer is set to 0, the equipment will run continuously.
When Fr = 2, the motor can alternate between the two rotating directions. To set the different
rotation and stopping times, follow the next instructions:
1. Set the FORWARD rotation time:
i.
Press
ii.
Use
iii.
Press
2. Set the STOPPING time:
i.
Once you press
ii.
Use
iii.
Press
3. Set the REVERSE rotation time:
i.
Once you press
ii.
Use
iii.
Press
Note: the forward, stopping, and reverse rotation times can be selected in minutes. The total
time can be selected in hours and minutes. See below how to select the unit.
Setting the rotation times
→ the number on the right side of the screen will flash.
to choose the motor running time.
to enter the value and return to the home screen.
→ the indicator Fd will show.
to choose the motor forward running time.
to enter the value.
the indicator p- will show.
to choose the motor stopping time.
to enter the value.
the indicator Rd will show.
to choose the motor stopping time.
to enter the value and return to the home screen.
12
Tabla de contenido
