Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Product Safety Information
Intended Use:
Model 210G Sprayer is designed for paint, lacquer, stain or other finish type material.
For additional information refer to Product Safety Information Manual Form 16576563.
Manuals can be downloaded from www.irtools.com.
Product Specifications
Model
210G
Operations
Spray Gun Handling
Do not point the spray gun at anyone or at any part of the body.
Ensure appropriate air line filter is being used. Water, oil, and debris in the air may cause damage to
the workpiece.
The spray gun should be held perpendicular to the work surface and 6 to 12 inches from the work surface.
Keep the gun parallel to the work surface during the stroke to ensure even coating. DO NOT move the gun in
an arc. This will result in a build up of paint in the center of the stroke and a light coating at each end.
Start the gun moving prior to pulling the trigger and release the trigger before stopping the gun movement.
Overlap strokes enough to get a uniform finish.
(Dwg. TP2049)
Form 04579611-Edition 2
Type
Gravity
WARNING
NOTICE
Fan Direction
(Dwg. TP2053)
Maximum Air Pressure (psig)
50
Air Cap
Lock Ring
3
Tabla de contenido
