BTV E1260 Manual De Instrucciones página 2

Idiomas disponibles

Idiomas disponibles

1. THECNICAL FEATURES
Power: Use only 9 V-Alkaline batteries. Look at the sell- by date on the battery.
6 digit user code.
Automatic blocking system for 2 minutes when more than 3 consecutive incorrect codes are entered.
Low battery warning system and inside easy access to replacement of battery.
External power supply to open your safe in case the battery are completely discharged.
IMPORTANT Check every action with open door, before closing it.
2. LOCK OPENING
To switch on the lock power supply, press button "ON".
Enter the 6-digit numerical or letter code (the lock is set at works
code 1 2 3 4 5 6 when supplied)
Every time the button is pressed in code entering, an acustic signal
sounds.
Turn bar handle clockwise until stop position reached and just pull it.
The safe is open, bar handle is in inclined position. The entry of a
valid code is confirmed by flashing of the green LED. If pauses are
longer that 20 sec. The lock opens automatically. Within 4 seconds
after code entering is the lock is ready to be opened. If during that period of time the bar handle is not turned in
"open"-position, the lock is secured again.
3. CHANGE OF CODE COMBINATION
It is recommended to mark on paper or to record on data medium the new code combination as well as to storage
it outside the safe.
The new code combination should be tested with lock and safe opened
Open lock with valid primary code
Press ON
Press button P
Enter valid works code 1 2 3 4 5 6 or former user code ( if the green LED flashed continuously, the operation is
correct completed).
Enter new 6 digit code X X X X X X ( if after entering the green LED flashed continuosly and acoustic signal sounds 2
times, the operation is correct completed)
Enter new 6 digit code X X X X X X X again (if after entering the green LED flashed 1 time, the operation is correct
completed)
If the new secondary code was incorrectlly confirmed, the red LED signal appears 3 times. Valid remains the old
code combination. Repeat the sequence.
MANUAL DE INSTRUÇÕES. 220M 350M
Código 140205 Rev04/14
loading

Este manual también es adecuado para:

220m350m