Uline H-86 Manual De Instrucciones página 2

1. Insert standing tube into pedal base and connect with short bolt.
(See Figure 1)
2. With four long bolts, lock washers and nuts, connect body to standing
tube. (See Figure 2)
3. Attach tension rod to puller located under base. Attach to foot
pedal. (See Figure 3)
4. Connect working plate fixed bracket to body. Attach operating
board to bracket using two short bolts, four flat washers and two
wing nuts. (See Figures 4-5)
NOTE: When attaching working plate bracket, leave enough
space between body and top of bolts operating board can
be attached easily.
PAGE 2 OF 12
ASSEMBLY
Figure 5
Figure 1
Figure 2
Figure 3
Figure 4
0621 IH-86