HUANUO HNCM9 Instrucciones De Instalación página 4

Install the Pole to the Desktop
Step 1
Option A: Desk Clamp Install
1. Install the "C"-Clamp Brace(c) to the Pole (a) using 3pcs M5x14
Bolts(f), and tighten using the Allen Key(o), see Figure 1.
2. C-clamp (b) was mounted on the Clamp assembly according to the
thickness of the table top. Thickness can be changed to three
positions. Respectively,1: 11-74 mm(0.43"-2.95");2: 26-89
mm(1"-3.5");
3: 41-104 mm(1.6"-4").
Use 2 M8x12 bolts (g) and tighten them with an Allen wrench (o), see
Figure 2.
3. Use plastic knob to tighten C-clamp to the table, see Figure 3.
1
Figure 2
Option B: Grommet Base Install
Existing Grommet Hole Installation
If the existing grommet hole comes with a
plastic protector, remove it to ensure a flat
surface before installing the desk mount.
1. Install the Grommet Base Plate(m) to the
Pole(a) using 3pcs M5x14 Bolts(f), and
tighten using the Allen Key(o), see Figure 4.
2. Position the Pole(a) on the mounting
surface and secure using the Support Plate
(j), M10 Washer(k), Spring Washer(l) and
M10 Bolt(i). Fasten the M10 Bolt using
provided Wrench(p), see Figure 5.
2 3
Figure 5
3
f
Figure 1
b
Plastic Knob
Figure 3
f
Figure 4
j
k
l
i
a
c
g
o
a
m
P