Identification Of The Fittings; Detecting Fittings - Schell 00 503 00 99 Manual Para La Puesta En Servicio Y La Configuración

Confi uration of t e e C

Identification of the fittings

Identification of t e fittin s
In the conte t of commissioning the eSCHELL net or , the detected fittings
are sho n in the device list
To get the overvie of the eSCHELL
a sensible set up of the system, the individual fittings in the system first have
to be detected and given meaningful names.
etectin fittin s
To detect the fittings, you can open them manually using the eSCHELL soft-
are, so as to identify the relevant fitting on site by the
Ho ever, the serial numbers of the connected eSCHELL bus e tenders are
also stored in the eSCHELL soft are. If you note the serial numbers of the
eSCHELL bus e tenders during installation in your pipeline layout, you can
identify the fitting and installation location by comparing it
tion in the eSCHELL soft are.
Path: Devices — All Devices, Sho
Serial Number
ou can identify the fitting on site via the valve test.
Path: Devices — All Devices, Sho
Error History and alve Test — alve Test
» Open the fitting valve via the soft are button.
The addressed fitting opens and can be identified.
LL ater mana ement server
ith consecutive numbering.
ater management system and to enable
All Devices — Faucet
All Devices — Faucet
Fig 14: Carrying out valve test
ater o .
ith the informa-
— Modules —
— Diagnosis,
Error History 4
-
Error History 5
-
Error History
Valve Test
Faucet Valve
Open/Close
EN
croll 
Delete
Opened
153