Standard Features; Cleaning And Maintenance; Troubleshooting - Ca-Mi MAT 130 Manual De Instrucciones


Simple to operate.

Portable and lightweight.

Pad consists of 130 bubble cells.
The medical device does not need maintenance or lubrication.
Before use always check correct functioning and safety of the device.
Unpack the instrument and always check integrity of plastic parts and feeding cable, they might have been damaged
during previous use. Connect cable to electrical network and turn switch on.
Before using the device on people carefully clean the mattress with neutral detergent.
Never immerge the compressor into water. Drain the mattress after each wash.
MATTRESS: A first cleaning of the mattress can be made using a damp cloth.
Do not use abrasive cloths and / or cutting surfaces that might damage the surface of the mattress.
COMPRESSOR: Cleaning the compressor with damp cloth and very clean.
Never immerge the compressor into water. Check periodically that the connectors are not clogged by dust.
WARNING: All the cleaning and maintenance operation must be made after disconnected the compressor from the
electrical network.
DO NOT IMMERSE THE PUMP IN WATER
DO NOT HEAT OR STEAM IN AUTOCLAVE

TROUBLESHOOTING:

PROBLEM
The compressor will not turn.
The mattress doesn't take the form

STANDARD FEATURES

PRODUCT FUNCTIONS

CLEANING AND MAINTENANCE

Verify the plug may be misplaced in the wall socket
Check that you have not missed a fuse.
Check that the basis of the mattress is firmly attached to
the items.
Make sure the mattress is firmly attached to the bed.
11
Pump
The function of the pump are described below.
Please refer to the figures
Power Switch
 The Power Switch is at the front side of the
pumps
 Turn ON / OFF the power, the pump will
start / stop operation
Pressure adjust knob
 Turn the soft / firm knob to set a
comfortable pressure level
Mattress
The MAT-130 come with air mattress made of
the material Nylon / PVC provided optionally
with the pump.
SOLUTION
GB