CLEANING AND MAINTENANCE
WARNING
Risk of electric shock! Before cleaning, switch off the treadmill
and unplug the power cord from the wall outlet.
Cleaning
•
Wipe away the dust on the belt, running board and side footboard as
excess dust may increase the frictional on the belt and cause damage to
the machine. It is recommended to clean the machine once a month.
Lubrication
•
Lubrication is needed per 300 km. The treadmill will sound the alarm
"di di di" and displays "OIL" . At the same time the oil icon will be lit up to
inform you to oil. Please lubricate the oil on the middle of the running belt.
•
After lubrication press the STOP button for more than 3 seconds in
standby mode and then the machine will sweep off the alarm and the
lubrication information.
•
We suggest you lubricate the treadmill as the following method:
Frequency of use
(hours per week)
less than 3 h
3-5 h
more than 5 h
Centring the running belt
•
The running belt may become off-center after using for a period of time.
•
First allow the machine to run by itself and the belt may centralize
automatically.
•
If it does not centralize automatically, you can adjust the position of the
belt by screwing the bolt shown in the images below.
•
If the running belt has shifted to the right, you need to tighten the bolt on
the right of the belt or loosen the bolt on the left.
•
If the belt has moved to the left, you need to tighten the bolt on the left of
the belt or loosen the bolt on the right.
Adjusting the running belt tension
•
Please adjust the bolts according to the diagram below.
•
When adjusting the two sides make sure each adjustment is the same, on
either side of the treadmill.
Lubrication
(intervals in months)
every 6 months
every 3 months
every 2 months
EN
83