Disassembling; Before Use - Moretti MOPEDIA RS992X Manual De Instrucciones

6
RS997X – Overbed table with wheels, painted steel frame, automatic regulation
Do not remove the safety screw before point "3"
ATTENZIONE!
1. Unpack the product and check that the
content matches with the description of the
parts in the manual. Assemble the four castors.
2. Assemble the column using the perforated plate
(fig. D), the two big screws (fig. A) and lock them
with the Allen wrench.
3. Insert the tray in the projecting tube of the
column.
4. Assemble the tray with the small screw (fig. B)
using the Allen wrench. Remove the black screw
(A pag.8) that it is working as a security and
replace it with the one inside the bag (B pag.8).
5. Now the overbed table is ready for use.

8.2 Disassembling

• To disassemble do the exact opposite of the above instructions

9. BEFORE USE

• Always check the status of the mechanical parts to guarantee they are used in total safety.
• Check the device is properly assembled. Pay particular attention to the locking of the knobs.