Bang & Olufsen BeoSound 2 Manual De Instrucciones página 11

Switch between playback and download: BeoSound 2 must be placed on
the docking station. Press GO to start playback, or press and hold GO for 2
seconds to connect to the computer – enabling you to download to
BeoSound 2. The docking station light changes colour accordingly.
Change mode: Switch between BeoPlayer and iTunes mode. BeoSound 2 is
in BeoPlayer mode per default. To change this setting, make sure that
BeoSound 2 is paused, and that the Earphones are connected.
Go to iTunes mode:
Press and hold ∧ and
ss
Then press GO twice, without
letting go of the first two
buttons. Audible feedback
informs you that BeoSound 2 has
changed to iTunes mode.
BeoSound 2 feedback
Audible feedback: BeoSound 2 gives you audible feedback for example
when:
– Battery power is low (beep repeated every 30 seconds)
– Error occurs (beep repeated every 5 seconds)
– Firmware update is completed
– A memory card is formatted
Docking station light feedback: When BeoSound 2 is placed on the
docking station, the docking station lights up to indicate its current status:
Green... Track playback or pause, not connected to the computer.
Red... Download mode, connected to the computer.
Orange... Resetting – continuous orange light feedback indicates error.
Flashing light (red or green)... Battery charging.
Flashing red and green, followed by orange, then red... Updating Firmware.
All manuals and user guides at all-guides.com
Go to BeoPlayer mode:
Press and hold ∨ and
.
Then press GO twice, without
letting go of the first two
buttons. Audible feedback
informs you that BeoSound 2 has
changed to BeoPlayer mode.
ss
.
11