Service/Maintenance; Consumables - Dustcontrol DC Tromb Turbo Traducción Del Manual De Instrucciones De Servicio Original

Service/Maintenance

Cleaning
The machine must be switched off and unplugged before cleaning and maintenance.
Filter replacement
The fine filter must be replaced at least once a year. Only original filters may be used. HEPA filters must be replaced after
300 hours.
WARNING
Filter replacement may only be performed by trained personnel. Use a protective mask and suitable
equipment.
Release and lift off the upper part for free access to the filter. Lift the filter straight up. If appropriate, fit a plastic bag over the
cyclone to prevent the dust in the filter from spreading. Check the gasket when replacing the filter. A worn gasket can allow
hazardous dust to escape. Never use old gaskets or non-OEM parts. Place used filters in a plastic bag and seal the bag. See
instructions below.
1
Regular checks
Regularly check the power cord for damage.
The machine must be tested and inspected at least once a year due to its use with hazardous materials. Worn parts must be
replaced. Never risk functionality and service life. Only use genuine parts.

Consumables

Description
Coupling socket
Coupling socket
Hose Ø=38 (Antistatic)
Hose Ø=50 (Antistatic)
Hose kit 50/38 L=7 M
HEPA filter
Fine filter, polyester with integrated filter guard
Fine filter, cellulose with integrated filter guard
Plastic bag, 50 pcs
Intellibag, 10 pcs/roll
Plastic bag Longopac
For spare parts, see the Dustcontrol
24
2
Part No.
2108
2131
2012
2013
2125
44016
44017
44043
4314
43619
432177
website.
DC Tromb Turbo, 99049-A
3 4