Orbegozo DH 1040 Manual Del Usuario página 36

Removing the collected water
2. Continuous draining
Water can be automatically emptied into a floor
drain by attaching the unit with a water hose
( 16.5*13.5mm) (not included).
Remove the rubber plug from the back of the
unit and store it in a safe location.
Insert the water hose into the unit from the
drain outlet in the back of the unit as shown in
Fig.8.
Attach the water hose to the drain hose
outlet of the unit.
Make sure the connection of the water hose
and the drain hose outlet of the unit is tight
and do not let the water leak.
Then lead the water hose to the floor drain or
a suitable drainage facility.The drainage facilify
should be lower than the drain outlet of the unit.
Be sure to run the water hose sloping downward
and let the water to flow out smoothly. Do not
install the water hose as shown Fig.9a and Fig.9b.
Make sure the water hose is lower than the
drain hose outlet.
NOTE: When the continuous drain feature is not
being used,remove the drain hose from the outlet
and attach the rubber plug back to the drain outlet.
OPERATING THE UNIT
Fig.9a
Do not block water flow by a rise.
Do not block water flow by a retortion.
35
Remove the
rubber plug
Insert the water
hose from the
drain outlet
Fig.8
Fig.9b