Tripp-Lite B127A-1A1-BDBD Manual De Operación página 8

Standard Extender Kit Installation
Model B127A-1A1-BDBD
Notes:
1. Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
2. To achieve maximum distance and performance, use 24 AWG solid wire Cat6
cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher
than 24 AWG, will result in shorter extension distance. Higher gauge cabling,
such as 26 AWG, has a more limited transmission capability than lower gauge
cabling. All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid-wire
cabling.
3. The installation diagram shows a B127A-1A1-BDBD unit.
4. External power is not required for remote receiver units due to Power over Cable
(PoC) technology incorporated in the transmitter units.
B127A-1A1-BDBD extender kit



IR Control
1. Make sure all equipment in the installation—such as monitors, the
DisplayPort source and the transmitter—is powered OFF.
-09-170-Book.indb 8 -09-170-Book.indb 8
Up to 230 ft. Cat6 solid cable at 4K/60 Hz
Up to 15 ft. DisplayPort cable at 4K/60 Hz
Up to 15 ft. HDMI 2.0 cable at 4K/60 Hz
IR
Pad
SENSOR
 
Monitor
DisplayPort
Source
LOCAL / TRANSMITTER

Micro-USB cable

Toslink cable
IR Control

Up to 230 ft. (70 m) at 4K/60 Hz
8
IR USB
Pad
SENSOR KEYBOARD

MOUSE


TV
REMOTE / RECEIVER
USB
4/6/2021 3:50:07 PM 4/6/2021 3:50:07 PM