Tools and Materials
Masking
Silicone
Tape
Sealant
Center
Punch
Assorted
Screwdrivers
Before You Begin
WARNING: Risk of personal injury. Do not cut the tempered glass. If the glass is cut, the glass
will shatter and may cause personal injury.
WARNING: Risk of personal injury or product damage. Unframed tempered glass should not
contact hard surfaces or it may shatter. Do not touch the edge of the tempered glass panel with the
tools or any hard objects. Do not set the unframed tempered glass directly on the floor.
Record the model number on the Homeowners Guide. The proper model number will enable our
customer service representatives to quickly help you if needed.
Your new Sterling door can be installed with the door opening to either the right or left. Install the
door with the pivot side away from the showerhead for best results.
Before starting the installation, layout and identify all of the parts. Inspect for damage.
Part profiles are used in each installation. Illustrations are not to scale and should be used for part
identification only.
The shower receptor should be installed and prepared at this time, including finished wall materials
Some steps in these instructions are specific to a right or left side hinge installation. Follow the
instructions which pertain to your installation configuration.
Closely follow the instructions pertaining to the sealant application on the door. Sealing areas other
than those shown may cause leaking.
Two people should perform this installation.
1019156-2-H
Tape
Measure
Drill and
Assorted
File
Drill Bits
Miter Saw or Hacksaw with
32 Teeth per Inch Blade
Knife
Level
Pencil & Felt
Tip Marker
Claw
Hammer
Safety Glasses
Miter Box
2
Plus:
Drop Cloth
Scissors
Caulk Gun
Sterling