Installing The Light Plate - Kichler Bezel 300318 Manual De Instrucciones

INSTALLING THE LIGHT PLATE

Step 1. Step 1. Remove one of three screws which preinstalled on mounting plate Remove one of three screws which preinstalled on mounting plate
and keep for later use. Loosen the other two (do not remove). Place the two and keep for later use. Loosen the other two (do not remove). Place the two
slot holes on the light plate over the 2 screws previously loosened from the slot holes on the light plate over the 2 screws previously loosened from the
mounting plate. Rotate the light plate until it locks in place at the narrow end mounting plate. Rotate the light plate until it locks in place at the narrow end
of the key holes. Secure by tightening the 2 screws previously loosened and of the key holes. Secure by tightening the 2 screws previously loosened and
the one previously removed. (Fig. 22) the one previously removed. (Fig. 22)
Mounting Bracket
Fig. 22a
Light Plate
Fig. 22b
14 | KICHLER.COM