Installing The Blade Holder Ring - Kichler Bezel 300318 Manual De Instrucciones

INSTALLING THE BLADE HOLDER RING

Motor Assembly
NOTE: NOTE: Before continuing, make sure the power is disconnected by turning Before continuing, make sure the power is disconnected by turning
off the circuit breaker or removing the fuse at the circuit box. off the circuit breaker or removing the fuse at the circuit box.
Step 1. Step 1. Place the blade holder ring up to the motor assembly, and put the Place the blade holder ring up to the motor assembly, and put the
Blade Holder Ring
four positioning posts on the blade holder ring to four holes on the motor four positioning posts on the blade holder ring to four holes on the motor
Fig. 18a
assembly, so that four holes on the blade holder ring align with the four holes assembly, so that four holes on the blade holder ring align with the four holes
on the motor assembly. (Fig. 18) on the motor assembly. (Fig. 18)
Fig. 18b Fig. 18c
12 | KICHLER.COM