Setting The Clock Format - Sangean WFR-20 Manual Del Usuario

Setting the clock format

The clock display can be set to 12 or 24 hour format. The selected
format is then also used when setting the alarms.
1. Usethe Select control to switch on your radio and to access
the menus. If needed, use the Back option to access the main
Mode menu.
2. Rotate the Select control until the display says 'Configure'.
Press and release the Select control to enter the configure menu.
3. Rotate the Select control until 'Clock Setup' is highlighted on
the display. Press the Select control to enter the clock setup menu.
4. Rotate the Select control until 'Clock format' is highlighted on
the display. Press the Select control to enter the clock format menu.
5. Rotate the Select control to select either 24 hour or 12 hour format.
Press the Select control to confirm your choice of clock format.
45
20070929_WFR-20_381R101-A_GB.p65
2007/10/1, ¤U¤È 05:14
GB
42