Tabla de contenido
STATEMENTS
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
> Reorient or relocate the receiving antenna.
> Increase the separation between the equipment and receiver.
> Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
> Consult the dealer or an experienced technician for help.
This device complies with Part 15 of the FCC Rules and with Industry
Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions:
> this device may not cause harmful interference, and
> this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications made to this equipment not expressly
approved by Manufacture Modules Technologies SA may void the FCC
authorization to operate this equipment.
Japanese Radio Law and Japanese Telecommunications Business
Law Compliance.
This device is granted pursuant to the Japanese Radio Law (電波法)
and the Japanese Telecommunications Business Law (電気通信事業法)
This device should not be modified (otherwise the granted designation
number will become invalid)
12
All manuals and user guides at all-guides.com
Manufature Modules Technologies Sarl
Chemin du Pré-Fleuri, 5
1228 Plan-les-Ouates
Switzerland
Declares that the product:
MMT-100
complies with the essential requirements of Article 3 of the R&TTE 1999/5/
EC Directive, if used for its intended use and that the following standards
has bveen applied:
Place and date of the declaration of conformity
Geneva, 01.04.2017
Philippe Fraboulet, CEO
1. HEALTH
(ARTICLE 3.1.A OF THE R&TTE DIRECTIVE)
APPLIED STANDARD(S)
EN 62311:2008
2. SAFETY
(ARTICLE 3.1.A OF THE R&TTE DIRECTIVE)
APPLIED STANDARD(S)
EN 60950-1:2006 + A11:2009 + AC:2011 + A12:2001 + A1:2010
3. ELECTROMAGNETIC COMPATIBILITY
(ARTICLE 3.1.B OF THE R&TTE DIRECTIVE)
APPLIED STANDARD(S)
EN 301 489-1 V1.9.2
EN 301 489-17 V2.2.1
4. EFFICIENT USE OF THE RADIO
(ARTICLE 3.2 OF THE R&TTE DIRECTIVE)
APPLIED STANDARD(S)
EN 300 328 V1.8.1
202-SMF029
R
USER'S MANUAL
13
Tabla de contenido
