Setting The Temperature - Philips GC6310/03 Manual De Instrucciones

EnGlish
8
7 Remove the mains plug from the wall socket.
8 Let the appliance cool down for approx.  minutes.
9 Fill the steam tank as described in section 'Filling the steam tank' and let the appliance heat
up again.

Setting the temperature

1 Put the iron on the iron stand.
 To set the required ironing temperature, turn the temperature dial to the appropriate
position (Fig. 6).
Check the laundry care label for the required ironing temperature
Symbol on
laundry care label
B
C
D
Z
If you do not know what kind or kinds of fabric an article is made of, determine the right ironing
temperature by ironing a part that is not visible when you wear or use the article.
Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent shiny patches.
Start ironing the articles that require the lowest ironing temperature, such as those made of
synthetic fibres.
 Put the mains plug in an earthed wall socket and set both the steam tank switch and the iron
switch to 'on'. (Fig. 7)
The steam tank and iron power-on lights go on. The temperature light on the iron also goes
,
on.
The steam tank and the soleplate start to heat up.
,
Note: The iron is hot enough when the temperature light goes out.
Note: If you have ironed at a high temperature and then set the temperature dial to a lower setting, wait
until the temperature light goes on again before you continue ironing. This prevents damage to your
fabrics.
Note: During ironing, the temperature light goes on from time to time. This indicates that the iron is
heating up to the right temperature.
tips
- If the fabric consists of various kinds of fibres, always select the temperature required by the
most delicate fibre, i.e. the lowest temperature. For example: if an article consists of 60%
polyester and 40% cotton, it must be ironed at the temperature indicated for polyester ( 1) and
without steam.
- When you steam iron woollen fabrics, shiny patches may occur. To prevent this, use a dry
pressing cloth or turn the article inside out and iron the reverse side.
Type of fabric
Synthetic fabrics (e.g. acetate,
acrylic, viscose, polyamide,
polyester) and silk
Wool
Cotton, linen
Please note that Z on the label
means that the article cannot be
ironed.
Temperature Steam setting
setting (GC60 only)
MIN (see 'Ironing
1
without steam')
Low to medium
2
Medium to MAX
3