MAURER ZANTE Manual De Instrucciones página 23

STEP 4
4-5. Secure the 3 pcs 90 mm pins (reflector support bolts) on the cap of flame
screen.
4-6. Connect the gas steel pipe with burner and go down through the main
pole.
4-7. Bind 2 or more rounds of Teflon plumbing tape around the gas burner
inlet connector and connect the gas pipe. Use a wrench to tighten the
connection.
4-8. Fix the completed burner unit to the post by 4 pcs M6 x 10 mm bolts.
STEP 5
5-3. Put Ø8 mm washer on each reflector support bolt.
5-4. Fasten the reflector with 3 pcs washers and 3 pcs M8 mm castle nuts.
STEP 6
6-5. Lift the tank housing and rest it on the post plate.
6-6. Connect the other end of gas hose to the regulator and secure with metal
clamp. (For gas hose with threaded connectors, bind 2 or more rounds of
plumbing tape around the regulator outlet connector before connecting
the gas hose for security.)
6-7. Connect the regulator to the gas cylinder and tighten it with adjustable
wrench.
6-8. Put gas cylinder on the stand.