Operation Introduction - TOPDON BT100 Manual Del Usario

Ocultar thumbs Ver también para BT100:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 7

Operation Introduction

The tool is powered by solely the vehicle battery. Connect the RED (+) Positive
Battery Clamp to the (+) positive battery terminal, and connect the BLACK (-)
Negative Battery Clamp to the (-) negative battery terminal. Ensure that the clamps
are securely attached to the correct terminals.
The LED Display will display the message below;
Battery Tester
12.5V
Choose your preferable language;
Main Menu
1. Batter y Test
2. Cranking Test
3. Char ging Test
4. Review Data
5. Language
1. Battery Test (for 12V battery)
TOPDON BT100 will test each battery according to the selected actual system
standard and rating marked on the battery.
1.1
Before Test
The engine and all other accessory loads must be
to have accurate results. Turn on the vehicle headlamps for 2~3 minutes until
the battery voltage drops back to normal value if the battery is just fully charged.
1.2
Steps
1) Press the "M" button to display the main menu and select the
Main Menu
1. Batter y Test
2. Cranking Test
3. Cha rging Test
4. Review Data
5. Language
4
Language
1. English
2. French
3. German
4. Spanish
5. Italian
6. Russian
OFF
during test in order
"1. Battery
Test":
2) Press and hold the "▲" or "▼" button to select the
on the battery rating label ) , then press "ENTER" to continue.
Battery Type
1. Regular Floode d
2. AGM Flat Plat e
3. AGM Spriral
4. GEL
5. EFB
3) Press and hold the "▲" or "▼" button to select the correct testing standard
( specified on the battery rating label ), then press "ENTER" to continue.
Select Input
1. CCA
2. DIN
3. JIS
4. EN
5. IEC
... ...
4) Press and hold the "▲" or "▼" button to select the battery rating values
( specified on the battery rating label ).
Setting Rate
300A
5) Press "ENTER" to start the battery test.
6) The test result will display as follows:
Battery Test
Healthy:
60 %
Charge:
98%
Internal R =
Rated:
GOOD BATTERY
7) Replace battery if test result as depicted below displays:
"Battery
Type" ( specified
CCA
250CCA
12.95V
11.96mΩ
300A
5
Tabla de contenido
loading

Tabla de contenido