Veridian Healthcare 11-50D Manual De Instrucciones página 9

USING YOUR PULSE OX FIT
3. Press the power button to turn the unit on. The screen will briefly flash a test
display, and then begin the measurement.
Oxygen
Saturation
% Sp0
95
SpO2% Waveform
4. Solid dashes (– – –) will appear on the display for a few seconds, then the
display will begin to show the oxygen saturation (SpO
bpm) measurements.
Take care to not move excessively during monitoring. These are active readings
and may fluctuate slightly as you observe the display, responding to your heart
rate (bps) and other factors.
5. The Pulse Ox Fit should only be used for spot-checking blood oxygen
saturation and pulse rate and should not remain on the finger for more than a
few minutes at a time.
6. Remove the unit from the finger. The unit will automatically turn off after 5
seconds.
7. Clean the unit as directed before storage.
Pulse Rate
PR
2 bpm
84
Low Oxygen
Battery Saturation
Symbol
% Sp0
98
Pulse Bar Graph
Pulse Rate
PR
2 bpm
77
) and pulse rate (PR
2
ENGLISH • 9