Fora D30 Manual Del Usuario página 42

► Averaging Measurement Mode
Always apply the arm cuff before turning on the monitor.
Step 1
Press and hold
enter the averaging mode. Press
from1 to 4) whose test reading will be stored in its memory and press
to confirm. Then the cuff will begin to inflate automatically.
Step 2
After the first measurement is completed, the monitor will start count-
ing down before the second measurement begins. The number on the
right represents the remaining countdown between each measure-
ment. The monitor will take three (3) measurements consecutively
with intervals of 20 seconds.
42
for three seconds. The monitor will turn on and
to select user " " (numbers