Proper Measurement Position - Fora D30 Manual Del Usuario

Step 5
Press the hook material firmly against
the pile material. The top and bottom
edges of the cuff should be tightened
evenly around your upper arm.

► Proper Measurement Position

Step 1
Sit down for at least 10 minutes before measuring.
Step 2
Place your elbow on a flat surface. Relax your hand with the palm
facing up.
Step 3
Make sure the cuff is about the same height
as the location of your heart. Press
still and do not talk or move during the mea-
surement.
If the cuff is relatively lower/higher than the heart, the obtained blood pres-
sure value could be higher/lower than the actual value. A 15 cm difference in
height may result in an error of around 10 mmHg.
Remain
WARNING
RED LINESHOULD BE AT THE INSID
►The range index of cuff should
fall into this range.
INDEX MUST
39