Gb Original Instructions; Used Symbols; General Power Tool Safety Warnings - Dremel Fortiflex 9100 Serie Traducción De Las Instrucciones Originales

Ocultar thumbs Ver también para Fortiflex 9100 Serie:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
ORIGINAL INSTRUCTIONS

USED SYMBOLS

READ THESE INSTRUCTIONS
USE HEARING PROTECTION
USE EYE PROTECTION
USE A DUST MASK
CLASS II CONSTRUCTED
DO NOT DISPOSE OF ELECTRIC
TOOLS, ACCESSORIES AND
PACKAGING TOGETHER WITH
HOUSEHOLD WASTE MATERIAL
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
READ ALL SAFETY
!
WARNINGS AND ALL
INSTRUCTIONS.
Failure to follow the warnings and instructions may result in
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
WORK AREA SAFETY
a. Keep work area clean and well lit. Cluttered or dark
b. Do not operate power tools in explosive
liquids, gases or dust. Power tools create sparks
c. Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
ELECTRICAL SAFETY
a. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools.
b. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
c. Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
f.
If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
PERSONAL SAFETY
a. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
A moment of inattention while operating power tools
b. Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
c. Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool.
switch or energising power tools that have the switch
d. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result
e. Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
f.
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
POWER TOOL USE AND CARE
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
b. Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
c. Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
d. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
9
GB
Tabla de contenido
loading

Este manual también es adecuado para:

Fortiflex 9100-21F0139100ja

Tabla de contenido