Tracer LiPo Manual Del Usuario página 3

FUEL GAUGE OPERATION
IMPORTANT: The battery fuel gauge must be operated
AT LEAST 2 minutes after the load (such as a lamp) has
been switched off. The battery will recover slightly and
ONLY then will the fuel gauge give an accurate battery
state indication. After 2 minutes of no load - press and
hold the Fuel Gauge push button.
75-100% capacity 3 green & 2 red
50-75% capacity 2 green & 2 red
20-50% capacity 1 green & 2 red
10-20% capacity 2 red*
Less than 10% 1 red**
Empty No lights***
*Recharge as soon as possible.
**Battery is about to electronically switch off to prevent over discharge.
***Recharge within 12 hours.
3
SPECIFICATION
4