Tracer LiPo Manual Del Usuario página 2

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

OVERVIEW
Congratulations on purchasing the latest in portable
battery pack technology from TRACER POWER.
Please take a moment to read carefully the following
instructions to get the best performance from your
Lithium polymer battery pack.
FEATURES
• Lightweight - Up to 80% lighter than a SLA battery.
• Flat discharge curve - Light stays brighter for longer.
• Fuel gauge - Displays battery power status.
• No memory effect - Such as you get with
Ni-Cad batteries.
• Protected against:
OVERCHARGE
OVER TEMPERATURE
OVER CURRENT
DEEP DISCHARGE
SHORT CIRCUIT
• Supplied with:
AC mains charger, DC vehicle charger, cigar plug
output connector and protective pouch.
Additional adapter leads available on request.
1
RECHARGING
WARNING: REMOVE BATTERY PACK FROM
CANVAS POUCH BEFORE RECHARGING.
AC MAINS CHARGER
1. Plug the charger into AC mains - the LED light will
glow GREEN.
2. Plug the charger lead firmly into the battery
pack - the LED light will change to RED to
indicate charging.
3. When the LED light changes back to GREEN then
the battery pack is fully charged.
4. Disconnect the charger from the battery pack and
from the AC mains.
5. DO NOT leave the charger connected to the battery
for long periods after the battery is charged.
DC VEHICLE CHARGER
1. Plug the cigar charger into the vehicle 12V
socket - the GREEN LED should illuminate.
2. Plug the charger lead into the charge socket
on the battery pack - the RED LED will
illuminate when the battery is charging.
3. The RED LED will change to GREEN when the
battery is fully charged.
4. Disconnect the charger from the battery pack and
from the vehicle 12V socket.
5. It is recommended that the engine of the vehicle is
running if a more rapid charge is needed.
2
Tabla de contenido
loading

Productos relacionados para Tracer LiPo

Tabla de contenido