Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation
1
Installing the faucet assembly
CAUTION : Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
Shut off the water supply.
Clean off the installation surface.
Place the faucet (A) through the mounting-
holes in the sink.
Secure the faucet (A) to the sink using the
mounting nuts (C) provided .
NOTE: If the sink is uneven, use silicone under the
putty plate.
C
2
Preparing the pop-up assembly
Remove the plunger (I) and drain flange (E) from
the drain body (H).
Screw the lock nut (C) all the way down, and
push the rubber washer (F) down.
A
4
F
G
I
E
Capítulos
Tabla de contenido
